all over the place on this one :D What do you think?

Well when i pulled i wanted a very aggressive tire for fort myers and wauchulla and then again on some tracks i used a not so aggressive tire. In my thoughts it all depends on the track that you are at. as most of the pullers know that are tracks are some times pretty muddy. well i loved useing my boggers at most tracks that or my baja claws.

I thought about Baja Claws but I'm going a different route. My boggers are staying & I'm gonna get a less agressive for the other tracks. Our tracks are getting better & better. My truck loves my boggers

June 7th in Zellwood clay track outside more than likely there will be no rain for a few days before the pull. With the track in hot sun all day, I think the track MAY be hard and dry. Just a gamble though. I'm going with all terrains all the way around for the first time since Cleweston. Normally when I get to the track my gamble is off, so dont listen to me.

hey man you think that my nittos will be good enough even if it isnt dry???
(still havnt found a trailer or enough money...:frusty:)

[QUOTE=RNworkshop;428]hey man you think that my nittos will be good enough even if it isnt dry???


Yes. Your tires are perfect for most tracks.

Mickey thompason MTZ done very well for me. So did Procomp mud terrians

Bfg AT's or my choice would be some super swamper STS's

I love BFG A/T's (best all around tire IMHO) but we are coming into the rainy season and the tracks may end up stickier with an afternoon shower. I picked these up yesterday...

http://img.photobucket.com/albums/v217/JFoster/6-12-08001.jpg

them are nice:nod: I thought they were pit bulls in another picture I saw.

them are nice:nod: I thought they were pit bulls in another picture I saw.

The pit bulls didnt last 6 months.:mad: The pics of the truck with Pit bulls are from this time last year!

i Thought About Baja Claws But I'm Going A Different Route. My Boggers Are Staying & I'm Gonna Get A Less Agressive For The Other Tracks. Our Tracks Are Getting Better & Better. My Truck Loves My Boggers

If I Put Boggers On My Truck, It Would Never Spin A Wheel

If I Put Boggers On My Truck, It Would Never Spin A Wheel

Then you would be hooking all that fluger power to the ground

I picked up a mix matched used set of mud tires and run BFG MTs on the front and Interco Trxus MTs on the rear, 285/75s all around. I've only gotten to pull on them once and had rail pressure issues at the time, but last weekend I let a customer borrow them and on the way to the pull I wrote my first LBZ tune from scratch. He pulled out a full pull then went on to win the pull-off. It was hirst first time ever pulling and my first LBZ tune - all stock except exhaust, built trans and tune, no lift pump, no aftermarket lockers, and nothing under the hood has been touched. He weighed in at 7700 lbs in a 8500 lb class and those tires just grabbed that track awesome.

I picked up a mix matched used set of mud tires and run BFG MTs on the front and Interco Trxus MTs on the rear, 285/75s all around. I've only gotten to pull on them once and had rail pressure issues at the time, but last weekend I let a customer borrow them and on the way to the pull I wrote my first LBZ tune from scratch. He pulled out a full pull then went on to win the pull-off. It was hirst first time ever pulling and my first LBZ tune - all stock except exhaust, built trans and tune, no lift pump, no aftermarket lockers, and nothing under the hood has been touched. He weighed in at 7700 lbs in a 8500 lb class and those tires just grabbed that track awesome.
Good deal & welcome

I picked up a mix matched used set of mud tires and run BFG MTs on the front and Interco Trxus MTs on the rear, 285/75s all around. I've only gotten to pull on them once and had rail pressure issues at the time, but last weekend I let a customer borrow them and on the way to the pull I wrote my first LBZ tune from scratch. He pulled out a full pull then went on to win the pull-off. It was hirst first time ever pulling and my first LBZ tune - all stock except exhaust, built trans and tune, no lift pump, no aftermarket lockers, and nothing under the hood has been touched. He weighed in at 7700 lbs in a 8500 lb class and those tires just grabbed that track awesome.

:eek:

I'll most definately be running Super Swamper STS regardless of what the track conditions. i've seen them hook up good on every type of track - so hard they left black marks, pebbley, sandy, wet and muddy, powdery, etc.. Success with them is all in truck setup and air pressures but they are super versitile and hook up phenominally IMO. I'm sold. :D


C-ya

Boggers SUCK! :mad:

I like the procomp Xtreme A/T's they are aggressive, cleans out well, and grips dry surfaces very well too!

Boggers SUCK! :mad:

LOL, boggers on freighttrain 18 pulls in a row :nod: Our boggers have done alright on our truck. Gotta spin them hard to be effective

LOL, boggers on freighttrain 18 pulls in a row :nod: Our boggers have done alright on our truck. Gotta spin them hard to be effective

do you know where I can find 150hp and 1500RPM's?

do you know where I can find 150hp and 1500RPM's?

Yup any local GM dealer can hook you up with a DMax :pound:

:rolleyes: .

boggers suck! :mad:

not if u have enough hp!!!! ;)

not if u have enough hp!!!! ;)

true :(

i think a good new alternitave to BFG's are some ATZ's i just tryed them out and they clean out so much better than the BFG's did and seem to have a lot more bite in them

I'm gonna try these new BFG KM2's in Wauchula... guess we'll see how they stack up against the boggers!

I'm gonna try these new BFG KM2's in Wauchula... guess we'll see how they stack up against the boggers!

When u get the money try micky thompson mtz. I will be running some copper sts in wauchula well see what happens.:D

i was hoping to run some 39.5x15 Trxus STS tires use a 4in lift with a 3in body and some cut outs. but it seems that those are a little to large to run at most tracks.

When u get the money try micky thompson mtz. I will be running some copper sts in wauchula well see what happens.:D

I have a set of MTZ's just havent mounted them on rims yet!