Baddest around? [Archive] - ThePullingPlace.com

: Baddest around?


MoPower05
05-17-2008, 11:58 AM
Whos got the baddest gen 1 around?

BADDEST GEN 1
05-18-2008, 05:55 PM
fast eddie has got it!

Gen 1/2
05-20-2008, 10:26 PM
Eddie u don't have it get a tranny in that truck i hate hearin it i dont have overdrive lets race again when i come over to GDP this week

RNworkshop
05-20-2008, 10:39 PM
fast eddie has got it!

i am going to have to agree with him on thi one just because...
...I like it

Gen 1/2
05-20-2008, 11:04 PM
Eddie u Dont have the Baddest 1STGEN evertime i race u cry when i beat u get a tranny in that truck and lets race next time i come over to GDP :D

G D P
05-20-2008, 11:44 PM
Im just going to have to say i would like to see him run just more that a launch against leon, it would be a good run!

MoPower05
05-21-2008, 01:28 AM
I do believe you have been called out:eek:. I will bring the video camera and post the results. I dont know about Bradenton drag strip Solostyle, sounds like the race is at the GDP strip tomorrow. :D.

6.0PULLER
05-21-2008, 07:41 AM
:frusty:fast eddy spanked the king ranch 0-200 ft next time i will move the carpet from under the gas pedal:confused:

MoPower05
05-21-2008, 08:02 AM
:frusty:fast eddy spanked the king ranch 0-200 ft next time i will move the carpet from under the gas pedal:confused:

This is 6.0PULLER (Mike Peters)andBADDEST GEN1(Fast Eddy)
http://youtube.com/watch?v=F4Mw6qRvnKA

TNRGreene
05-25-2008, 01:44 PM
fast eddie has got it!

Ya, it's allright for a Dodge :eek: :pound: :D

BADDEST GEN 1
05-28-2008, 10:30 PM
have not been beat yet!

TNRGreene
05-28-2008, 10:36 PM
You must not be familar with these forums. Before you can make ANY claim. You must have 3 different videos from 3 different angles of the same thing,(4 is better though) can't be on you tube, multiple dyno runs & there is still a shift spike somewhere in there. & EVERYTHING must be documented for you by someone you do not even know & can never know. Sorry that's just how it is :nod: :eek: :pound: :D:D:D:D:D:D

2wd_sled_puller
05-29-2008, 12:25 PM
have not been beat yet!

You must be saying by any truck over in your area:eek:. Because ive handed it to that first Gen before.:nod:

G D P
06-04-2008, 12:49 PM
since you have been driving that chevy the old dodge has been parked up untill a couple of months ago, so im not sure what you have handed to it? and by no means is it the fastest truck around here ,it barley pulls away from my stock stroke so by bragging on beating it you might as well be bragging about beating *ff ! youll get a better reward in the end!

BiscuitsCummin
06-09-2008, 11:18 PM
wow sounds to me like we got some people that get a little fisty if im not mistaken it was asking who had the baddest first gen not who had the fastest truck or anything like that? and well there arent to many people who still ahve the old babys and i regret horribly bad ever getting rid of mine!!!! how ever i dont know what leon has done since ive been gone but im preety sure it aint it aint even close to what eddy has put into it!

on another note it puts a huge freaking smile on my face to see that thing up and running again as well as looking that good!!:D

Gen 1/2
06-11-2008, 09:47 PM
Well Eddie has help me out with the truck. and i beat Fast Eddie every time he needsssssssss a tranny overdrive is gone.
Cant wait to see what we have at the all diesel in Wauchula July12
If u'r trucks badder bring it lets see what u have :nod: :pound:

BiscuitsCummin
06-12-2008, 12:03 AM
dude both my trucks are gone leon you know who i am i had the ol'e 89 black dodge that was lifted anyways man both of my trucks are gone so i could afford to move to this giant damn sand box and go to school for cummins! anyways umm i wish i could be there ya i dunno how many times eddie has rebuilt that damn tranny hahaha i loved my 3 spd non overdrive never had a hick up or anything!!! but im in the process of purchasin another 1st gen out here but this time im making sure i go 5 spd so the only thing i gotta really worry about is that clutch buy big once and be done muahaha but best of luck guys at that pull and leon dont go braking that front u joint this time ok !!!:pound::pound::pound:

Gen 1/2
06-12-2008, 05:42 PM
We think we have that problem fixed Eddie's driven it in the all diesels so somethin might break. Eddie fells like he broke the truck in zellwood but when the truck is 16 years things tend to break.:frusty:

G D P
06-16-2008, 11:46 PM
well leons old dodge has a few tricks up its sleeve, its goin under the knife and were gona hope for the best! i just hope time will let us get it done for the all diesel pull in wachula.:)

JIT
06-17-2008, 05:26 PM
well leons old dodge has a few tricks up its sleeve, its goin under the knife and were gona hope for the best! i just hope time will let us get it done for the all diesel pull in wachula.:)

Bla bla bla bla bla bla.......

Gen 1/2
06-18-2008, 12:17 AM
Bla bla bla bla bla bla.......

U come to all diesel's and say that after I pull:nod:

JIT
06-18-2008, 05:21 PM
U come to all diesel's and say that after I pull:nod:

See you there Sally!

BiscuitsCummin
06-18-2008, 09:16 PM
hey leon best of luck man and eddie to even thogh he wont call my ass back!!!! anywho go show em that the good ol'e 1st gens still got what it takes man! best of luck and when the hell is it?

KountryKID
06-18-2008, 11:58 PM
july 12

TNRGreene
06-19-2008, 12:18 AM
See you there Sally!
LOL, that funny :nod: :D

Gen 1/2
06-26-2008, 01:51 AM
hey leon best of luck man and eddie to even thogh he wont call my ass back!!!! anywho go show em that the good ol'e 1st gens still got what it takes man! best of luck and when the hell is it?

Well sorry but my truck will not be ready for the all diesel pulls July 12 no 1st Gen unless fast eddie comes will be i stands wishin I was pullin with you all :frusty :frusty: :(

5-O Cummins
06-26-2008, 02:10 AM
Well sorry but my truck will not be ready for the all diesel pulls July 12 no 1st Gen unless fast eddie comes will be i stands wishin I was pullin with you all :frusty :frusty: :(

Why won't your truck be ready?

MoPower05
06-26-2008, 07:22 AM
He will pull his truck it just won't be complete. None of out trucks are ever completely done anyways.

TNRGreene
06-26-2008, 10:48 PM
None of our trucks are ever completely done anyways.

Amen

moyer_12valve
07-04-2008, 09:15 AM
Cant wait to see ye olde Gen 1/2 Pullin in front of me!

CoalTrain12
07-16-2008, 03:29 PM
I dunno boys the old grandpa gen 1 is pretty dagum bad. Maybe if the rain would give up one of these days i could get a chance to take pass or 2 on the ole' GDP drag strip. I'm not much for racin' just pullin' I need to get rid of this old Getrag 360 first anyone have a 9/12 speed eaton for sale?:cool:

2wd_sled_puller
07-17-2008, 12:45 PM
I dunno boys the old grandpa gen 1 is pretty dagum bad. Maybe if the rain would give up one of these days i could get a chance to take pass or 2 on the ole' GDP drag strip. I'm not much for racin' just pullin' I need to get rid of this old Getrag 360 first anyone have a 9/12 speed eaton for sale?:cool:

When i see this Badass first gen make a full pull then it will make me shake in my boots:D

CoalTrain12
07-17-2008, 03:19 PM
:cool:I think you should check your signature again, 13.20 ain't goin fast down the track. Only thing a duramax is good for is to hang off the front of a dodge for front weight in a sled pull!!!:alien: Why don't you get a Catepillar in that rock and then and only then will I be impressed.

JIT
07-17-2008, 04:33 PM
If it aint a Cat, its a Dodge!

CoalTrain12
07-17-2008, 08:28 PM
sounds good to me, honestly if i had to choose id pick an early to mid 90's rock with a "SEVERELY" modified Detroit diesel over a duracrap anyday. To tell the truth ive heard some things going through the rumor mill that Toyota is pouring over the idea to strike up a contract with Catepiller and start producing a very competative 3/4ton and 1ton line. Dunno if it would be in the near future considering fuel prices their marketing dept. might not find the idea very wise. I'd buy one. Sad as it is Japs already make good vehicles throw a yellow block in one and im sold.

TNRGreene
07-17-2008, 08:35 PM
:cool:I think you should check your signature again, 13.20 ain't goin fast down the track.

And your times are better with the truck in you signature? I agree there are faster but are you comparing & to what? Tune & an intake that's pretty good. I only ask because I don't know you or what you are using. I'd bet when you use the word fast you are referring to Brad's truck.

TNRGreene
07-17-2008, 08:38 PM
sounds good to me, honestly if i had to choose id pick an early to mid 90's rock with a "SEVERELY" modified Detroit diesel over a duracrap anyday. To tell the truth ive heard some things going through the rumor mill that Toyota is pouring over the idea to strike up a contract with Catepiller and start producing a very competative 3/4ton and 1ton line. Dunno if it would be in the near future considering fuel prices their marketing dept. might not find the idea very wise. I'd buy one. Sad as it is Japs already make good vehicles throw a yellow block in one and im sold.

Funny but the DMax is junk but Toyota is OK.....LOL
Ya, that makes sense :D

CoalTrain12
07-17-2008, 08:52 PM
If they put a Catepillar in a Yota that would really really hurt Ford and Chevy's sales and I think a Cat powered Tundra would out work a navistink and a duradoodoo any day. Track records Cummins is outstanding because of the years of development and excellent quality they put into their engines. Same goes for Catepillar.

CoalTrain12
07-17-2008, 08:57 PM
As for the ET comment I made 13.20 is slow compared to a super stock some others i enjoy watching that run a 7 second ET. I have a 16 year old 3/4 ton truck that was made to PULL. I Can't afford to put thousands of dollars in my Daily driver to keep it from blowing all to H*** under conditions it wasn't designed to opperate under. For some it's their thing for me its not.

TNRGreene
07-17-2008, 08:59 PM
If they put a Catepillar in a Yota that would really really hurt Ford and Chevy's sales and I think a Cat powered Tundra would out work a navistink and a duradoodoo any day. Track records Cummins is outstanding because of the years of development and excellent quality they put into their engines. Same goes for Catepillar.
No arquement about Cat. I know it will never be a perfect world but I don't bash other brands & agree on the cummins but I just could ride in that heapdodge puts around it for a good motor. I'm different then most. My truck of choice would probably be a ford body, cummins moter & IFS<--neither ford nor dodge ride like a gm & before you start this is my opinion based on what I use my own truck for
I just asked because you bashed DMax yet praise Toyota. Nothing more to it then that :D

TNRGreene
07-17-2008, 09:01 PM
As for the ET comment I made 13.20 is slow compared to a super stock some others i enjoy watching that run a 7 second ET. I have a 16 year old 3/4 ton truck that was made to PULL. I Can't afford to put thousands of dollars in my Daily driver to keep it from blowing all to H*** under conditions it wasn't designed to opperate under. For some it's their thing for me its not.

Based on that then yes 13.20 is SLOW :nod: That's why I asked

CoalTrain12
07-17-2008, 09:11 PM
Honestly i am the kinda person that if its not really worth talking about I wont. There was a guy i met in TN that had a cummins with an insane twin setup had a smaller turbo used to spool the big truck turbo hidin down there it ran a 9 second ET. NOW THATS CLEVER. heck I can run a 13.20 on my Exmark at work. he he he:pound::pound::pound:

CoalTrain12
07-17-2008, 09:15 PM
:nod:Dont Underestimate the grandpa dodge tho boys My Cb antenna adds another 364.98 ft lbs of torque. If ya don't belive me come see it.:alien:

solostyle
07-18-2008, 12:10 AM
Honestly i am the kinda person that if its not really worth talking about I wont. There was a guy i met in TN that had a cummins with an insane twin setup had a smaller turbo used to spool the big truck turbo hidin down there it ran a 9 second ET. NOW THATS CLEVER. heck I can run a 13.20 on my Exmark at work. he he he:pound::pound::pound:

very clever? how often do you visit diesel events? not very clever...but very common! twins dont mean your faster than a big single though. Who was this guy your met in TN that ran 9's? Stuckey (green dodge) or jimmy dale smith (marron and green dodge)? not very many people hit 9's so i think he has to be known!

2wd_sled_puller
07-18-2008, 12:13 AM
Based on that then yes 13.20 is SLOW

Hey watch MR 12 sec:eek::D

CoalTrain12
07-18-2008, 03:14 PM
Now where did you see me say "Twins meant faster/more power" i didnt. it was a white dodge i didnt actually meet the guy just watched the show. His trucks been down for a while because he blew the engine. Everyone calls him "Meecham" hes in Mt Juliet tn. Im not sure of any other info than that. As for u 2wd im not sure if its you but i've heard about your truck. Supposed to be not too shabby for a chebbie.:thumb:

TNRGreene
07-18-2008, 03:23 PM
Hey watch MR 12 sec:eek::D

Sorry Kurt but based on 9's...10 is slow :D

JIT
07-18-2008, 06:16 PM
If my aunt had balls, she'd be my uncle!

6.0superduty
07-18-2008, 11:28 PM
If my aunt had balls, she'd be my uncle!

Where do you come up with this stuff? Its friggin hilarious:pound:

Kyle

WHITEPOWERstrok
07-19-2008, 01:18 PM
if my aunt had balls, she'd be my uncle!
:D hahaahha

WHITEPOWERstrok
07-19-2008, 01:22 PM
o ,and by the way, there is a badass gen 1 in the dover/lithia area. its white, reg cab, lifted up on 40" ground hawgs, and its spanked my mega cabs ass! its an old man with a white pony tail....

josh, have u seen it before? i know derek knows which one im talkin bout....

WHITEPOWERstrok
07-19-2008, 01:37 PM
If it aint a Cat, its a Dodge!dodge are dogs?

CoalTrain12
07-19-2008, 02:07 PM
Nope they're Goats

JIT
07-19-2008, 09:15 PM
o ,and by the way, there is a badass gen 1 in the dover/lithia area. its white, reg cab, lifted up on 40" ground hawgs, and its spanked my mega cabs ass! its an old man with a white pony tail....

josh, have u seen it before? i know derek knows which one im talkin bout....

Megacabs are slow!

CoalTrain12
07-19-2008, 10:21 PM
Thats why I drive a megacab:D:D:D

CoalTrain12
07-21-2008, 01:20 PM
Im not too worried about ET's any how rocks are summed up as such


Chews Heads Eats Valves Runs Only Long ET's

If I had a 4foot hitch height i'd make full pulls backwards in my sleep :frusty:

CoalTrain12
07-21-2008, 01:22 PM
Just givin the chebbie guys a hard time, have to i was raised Ford and then Converted to dodge.

:DHey Josh why u pickin' fun???? I heard through the grapevine that you wanted to do a MegaCab Conversion???? :D

TNRGreene
07-21-2008, 03:29 PM
Chews Heads Eats Valves Runs Only Long ET's



Glad I don't have one of them :nod: :D

JIT
07-21-2008, 06:02 PM
:DHey Josh why u pickin' fun???? I heard through the grapevine that you wanted to do a MegaCab Conversion???? :D

No, I want a 4 door 2nd gen conversion! I do like the rear fenders on the dually mega's though!

CoalTrain12
07-23-2008, 04:01 PM
nice. I think you should do a Gen 1 Conversion.

hookman
07-23-2008, 09:43 PM
megacabs are slow!

but we pull the sled well:d

JIT
07-24-2008, 04:45 PM
but we pull the sled well:d

who are you?

solostyle
07-24-2008, 11:51 PM
who are you?

could be your daddy.....u never know! :D

JIT
07-25-2008, 10:17 AM
could be your daddy.....u never know! :D

true .

kah68
10-02-2010, 03:34 PM
Wow this is an old thread, heres my pick for baddest 1st gen...http://www.youtube.com/watch?v=DFpTDvkfYMo