Tony Burkhard
02-18-2009, 06:20 PM
Standard pulling hitches shipped for $299 in the US
Standard Duty Sled Hitch
Upright is 2.5" X 2.5" 1018 cold roll, chamfered and CNC machined 5/8" adjustment holes. Horizontal receiver is 2" X 2" 1018 cold roll, chamfered and CNC machined 5/8" keeper hole. D-ring is machine flame cut from 1" A-36 plate, hole measures 3" X 3.75" and side plates are 1/2" A-36 hot roll with CNC machined 5/8" adjustment holes. All 90 degree joints are 1/4" fillets and butt joints are beveled to a point and welded also leaving a 1/4" fillet.
Standard Duty Sled Hitch
Upright is 2.5" X 2.5" 1018 cold roll, chamfered and CNC machined 5/8" adjustment holes. Horizontal receiver is 2" X 2" 1018 cold roll, chamfered and CNC machined 5/8" keeper hole. D-ring is machine flame cut from 1" A-36 plate, hole measures 3" X 3.75" and side plates are 1/2" A-36 hot roll with CNC machined 5/8" adjustment holes. All 90 degree joints are 1/4" fillets and butt joints are beveled to a point and welded also leaving a 1/4" fillet.