Tony Burkhard
02-18-2009, 06:26 PM
Heavy Duty 2.5" pulling hitches starting at $325 shipped
Upright is 2.5" X 2.5" 1018 cold roll, chamfered and CNC machined 3/4" adjustment holes. Horizontal receiver is 2.5" X 2.5" 1018 cold roll, chamfered without hole. We left the hole out so you can easily tailor it to your exact needs. D-ring is machine flame cut from 1" A-36 plate, hole measures 3" X 3.75" and side plates are 1/2" A-36 hot roll with CNC machined 3/4" adjustment holes. All 90 degree joints are 1/4" fillets and butt joints are beveled to a point and welded also leaving a 1/4" fillet.
We will also make custom hitches.
Upright is 2.5" X 2.5" 1018 cold roll, chamfered and CNC machined 3/4" adjustment holes. Horizontal receiver is 2.5" X 2.5" 1018 cold roll, chamfered without hole. We left the hole out so you can easily tailor it to your exact needs. D-ring is machine flame cut from 1" A-36 plate, hole measures 3" X 3.75" and side plates are 1/2" A-36 hot roll with CNC machined 3/4" adjustment holes. All 90 degree joints are 1/4" fillets and butt joints are beveled to a point and welded also leaving a 1/4" fillet.
We will also make custom hitches.