ThePullingPlace.com

ThePullingPlace.com (https://www.thepullingplace.com/forum/index.php)
-   Rick Lance (https://www.thepullingplace.com/forum/forumdisplay.php?f=111)
-   -   Testers needed (https://www.thepullingplace.com/forum/showthread.php?t=708)

RickDLance 12-13-2008 05:59 PM

Testers needed
 
I'm needing a few testers for some minor changes I want to make in my header setup. If you're interested in getting a set of headers for a discount and don't mind getting your hands dirty then please PM me. Thanks!

ChevyDieselLLY 12-14-2008 05:19 PM

Rick i will be building an engine March - April time frame. it will have stage 2 heads from SoCal, full bottom end, dual fuelers, turbo is undecided but at the moment i am thinking about a GT42 or GT42Mag. Dustin and Winston at Diesel Addiction will be doing the build and will have a little more info on the specs of the engine. i know Dustin just installed a set of yours. let me know if what i will be doing is something you may want to try out. but like i said it wont be for a few months.

RickDLance 12-15-2008 10:32 AM

Keep me in the loop. ;)

JIT 12-15-2008 08:36 PM

Rick are you building them for 24v cummins? If so I am all ears... need a T3 flange.

josh

RickDLance 12-16-2008 10:03 PM

Sorry, but just the Dmax for now.

04BlackSmoker 12-16-2008 10:58 PM

What kind of set up do you perfer to put these on???

RickDLance 12-17-2008 09:07 AM

To qualify you MUST drive your truck daily, make at least 40 pounds of boost
at WOT, make at least 1600 degrees egt on a regular basis, and make approximately
600 HP or more. You must also be willing to install and remove the headers
multiple times if needed and ship them back to me as needed.

DocDyno 03-08-2009 06:34 PM

Herders
 
Rick,
Just saw this. We have a DMax LLY in one of our engine dyno test cells at the present time. If you would like some real data, temps, pressures, A-B comparos, etc. Let me know. We could run the data for you while we are working on some calibration and component development with this engine.

RickDLance 03-10-2009 07:24 PM

Where are you located? Is it a stock motor?

DocDyno 03-10-2009 07:46 PM

We are in northern Indiana. Yes it is a stock motor.

RickDLance 03-14-2009 12:17 AM

Send me a proposal. Probably need 6 hours total. Will I be able to do the parts swap myself?

RickDLance 03-14-2009 12:18 AM

Hey, my color changed??? Am I in trouble guys?? :pound:

DocDyno 03-14-2009 08:10 AM

Since we are currently doing calibration development on the dyno; we would gladly incorporate your header testing with the work we are already doing at no cost.

Yes you are welcome to make the hardware changes yourself to help control costs.

If you would like to make a donation for fuel and the development of an engineering report of the dyno data; we would, of course, welcome that.

We are interested in your project and helping your further your developnment if we can. We continue to look for ways to participate in morotsports projects. If we can provide you with meaningful development data, we hope you will tell your industry friends about our services.

TNRGreene 03-14-2009 11:03 AM

Quote:

Originally Posted by RickDLance (Post 7918)
Hey, my color changed??? Am I in trouble guys?? :pound:

You'd have to ask Wayne :confused:



100% free webcam site! | Awesome chicks and it is absolutely free! | Watch free live sex cam - easy as 1-2-3

2wd_sled_puller 03-14-2009 02:52 PM

Sounds cool rick. I am willing to help you out also rick. Im more of a sled puller. i can promise you we will see how they hold up to heat

RickDLance 03-14-2009 06:18 PM

I have openings for 4 testers. They will be testing a new ceramic coating on mild steel headers and up pipes. PM me if you're interested.

BullfrogJohnson 03-19-2009 10:21 PM

I make over 40lbs of boost and DD my truck and turn wrenches for a living so I should qualify just need to see if I have enough money:damnit

RickDLance 03-21-2009 10:22 PM

Let me know.:) The first set is installed and making HP. :)

MattZ71 09-26-2009 01:54 AM

Quote:

Originally Posted by RickDLance (Post 8063)
Let me know.:) The first set is installed and making HP. :)

awesome! ;);)


All times are GMT -4. The time now is 02:06 AM.

Powered by vBulletin® Copyright ©2000 - 2021, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.